Company history
Insinööritoimisto Ismo Lindberg Oy (Ltd) has 30 years experience of selling new and second hand machine tools and accessories.
Once upon a time young Ismo Lindberg worked for a while at Valmet, a company that today is known by name Metso. He had so many brilliant ideas he could not execute at Valmet so he realised that production was not the right place for him.
Ismo established his own company 1980 by name Insinööritoimisto Ismo Lindberg. The line of business was import and sales of machine tools.. Ismo was the first in Finland to create business relations to Taiwan and China in early 80´s. Since then company has experienced good and bad times, the worst being the severe economic depression in Finland in early 90´s. In 2003 company executed generation change as son Antti took operational leadership from Ismo who semi-retired and started as a Chairman of the Board.
Today
Today company is stronger than ever. The human resources are composed of a perfect division of young dynamic energy and mature experience which excels with Ismo´s 40 years experience in machine tool business. Along the years the company acquired also real estate to such an extend that in 2007 it was decided to separate it under a real estate company Autotalon Yrityspuisto Oy. This allows the main company to concentrate fully on it´s own business. In late 90´s company started project management service for comprehensive retrofit projects and also included shut-down and auction management into the service palette.
The company has sold several thousands of machines of which over 300 Chinese Diamond manual lathes, over 150 Taiwanese Johford CNC-machines and over 100 Italian Bianco saws.
The company is a member in EAMTM (European association of machine tool merchants) and well known both in Asia and Europe and e.g. has good contacts in Romania.
After generation change the turnover (MEUR) has developed as follows.
PERSONNEL
Company has 9 permanent employees and continuously couple of temporary employees.
Key persons:
Antti Lindberg Ismo Lindberg
Managing Director Chairman of the Board
Puh. 040 585 6879 Puh. 0400 640 956
Antti Pöyry Jarno Vauhkonen Harri Nieminen
Sales Manager Sales Director Sales Manager
Puh. 040 505 1777 Puh. 040 501 3399 Puh. 040 828 9251
Aimo Karvonen Tuomas Pöyry Juha Multisilta
Service Manager Service Engineer Development Director
Puh. 040 762 3519 Puh. 040 552 8111 Mob. +358 40 522 1147
PRINCIPALS
The company has following main principals.
Johnford - Taiwan
Agro – Taiwan
Primero – Taiwan
Bianco – Italia
Cosen – Taiwan
Diamond / Yunnan - Kiina
Proth - Taiwan
Runyan – Kiina
Shieh Yih Machinery Industry Co., Ltd, Taiwan
PRODUCTS
Products below are standard models. We also supply customized models for our customers needs.
JOHNFORD VMC-SeriesX-Axis 850 – 3050 mm
Y-Axis 500 – 1100 mm
Z-Axis 610 – 800 mm
Table 1000x500 – 3200x1000 mm
Load on table 600 – 4800 kg
Weight of machine 5500 – 23000 kg
Standard accessories:
Coolant system, spindle airblow, automatic lubrication system with alarm, chip conveyor, chip flushing system, full covers. Also available with APC
JOHNFORD DMC-Series
X-Axis 900 – 6000 mm
Y-Axis 900 – 3700 mm
Z-Axis 500 – 1066 mm
Table 1000x850 – 6000x2200 mm
Load on table 3000 – 40000 kg
Weiht of machine 9000 – 65000 kg
Standard accessories:
Coolant system, spindle airblow, heat exhanger, full overs, chip conveyor, rigid tapping, spindle oil cooler.
JOHNFORD HMC-SeriesX-Axis 762 – 1650 mm
Y-Axis 660 – 1270 mm
Z-Axis 660 – 1220 mm
Table 500x630 – 1000x1250 mm
Load on table 550 – 2500 kg
Weight of machine 11000 – 22000 kg
Standard accessories:
Coolant system, spindle chiller, chip conveyor, indexing table, rigid tapping, automatic lubrication system with alarm. Also available with APC.
JOHNFORD CNC-LathesSwing over bed: 400 – 1550 mm
Bar capacity: 42 – 610 mm
Z-Axis 400 – 10000 mm
X-Axis 180 – 685 mm
Weight of machine 3800 – 100000 kg
Standard accessories:
Coolant system, chip conveyor, full covers, automatic lubrication system, tool holders.
JOHNFORD VTC-SeriesMaks. swing 720 – 3000 mm
Maks. turning height 720 – 1600 mm
X-Axis 420 – 1935 mm
Z-Axis 720 – 1000 mm
Weight of machine 11400 – 50000 kg
Standard accessories:
Coolant system, full covers, cihp conveyor etc.
DIAMOND Manual lathes
Swing over bed 410 – 660 mm
Swing over cross slide 250 – 380 mm
Swing over gap 580 – 870 mm
Bar capacity 52 – 105 mm
Between centres 1000 – 5000 mm
Spindle morot 5,5 – 11 kW
Standard accessries:
2-axis DRO, 3- and 4-jaw chuck, steady rest, follow rest, coolant system, work light, chip covers, tool post etc.
.JPG)
BIANCO Band saws
Capacity 220 – 300 mm
Bow rotation 45°, 60° ja 90°
Control options:
Manual, semi-automatic, automatic or CNC
Accessories available:
Bundle cutting device, variator or inverter, chip conveyor, automatic loading unit, dry cooling device, variable vice pressue, bow rotation via program.
.JPG)
COSEN Band saws
Capacity from 180mm
Bow rotation 45°, 60° ja 90°
Control options:
Manual, semi-automatic, automatic or CNC
Also available horizontal models and lots of accessories.
.JPG)
PRIMERO VMCX-Axis 800 – 2000 mm
Y-Axis 400 – 870 mm
Z-Axis 420 – 710 mm
Table 1270x305 – 2180x810 mm
Weight of machine 2200 – 8000 kg
Available with C-Tek PC based control with chosen language.
RUNYAN ShearMax. capacity 4 – 20 mm
Max. working width 2000 – 4000 mm
Main motor 7,5 – 30 kW
Strokes 18 – 4 pcs/min
Gap 140 – 170 mm
Weight of machine 3800 – 23000kg
RUNYAN Press brake
Capacity 20 – 400 ton
Max. width 1320 – 4000 mm
Between columns 1005 – 3280 mm
Gap 200 – 400 mm
Stroke 80 – 250 mm
Oil tank 80 – 415 l
Main motor 4 – 37 kW
Weight of machine 1800 – 36000 kg
